Digidesign RM2

$1,749.00

Add to Cart:

When it comes to high-quality sound, Digidesign strives to create products that deliver the absolute best. To further ensure that you get the best-sounding audio possible in your creative endeavors, Digidesign now looks to redefine how you monitor your mixes with the Digidesign® Reference Monitor Series RM2, a professional, bi-amplified, near-field monitor co-developed with PMC, a world-leading professional monitor manufacturer.

RM2 unites Digidesign’s deep expertise in digital audio with PMC’s legacy of fine, handcrafted, cutting-edge design and meticulous manufacturing. Together, Digidesign and PMC have created a monitor that delivers unrivalled tonal accuracy, exceptionally low distortion, stunning clarity, more defined bass response, and incredible dynamic range, enabling professionals, aspiring professionals, and audiophiles to truly hear an impeccably accurate representation of their audio mixes at any stage.

Get even more details in the Digidesign Reference Monitor Series datasheet (PDF)

The RM2 features a 6.7-inch low frequency driver, a 1-inch ferrofluid-cooled high frequency driver, and a smaller footprint compared to the competition, but is big on power and sound quality. It’s the ideal monitor for recording studios, mixing suites, post-production facilities, broadcast installations, and other rooms that require a higher sound pressure level and even lower bass extension. But don’t let its smaller size fool you. Though the RM2 is relatively compact in stature, it can produce higher volumes and lower bass extension than other speakers of similar sizes — even if identical or larger drivers are used — thanks to PMC’s groundbreaking Advanced Transmission Line (ATL™) technology.

Because of its design, the frequency response also remains consistent regardless of how high or low you adjust the volume, meaning you won’t need to crank it to achieve maximum bass response. RM2 is also designed for a wide sound dispersion, so you’ll get accurate frequency response even when you’re listening in an off-axis position.

Features

Professional, bi-amplified monitor

Analog and digital inputs (up to 24-bit/96 kHz)

Audiophile-grade, analog-controlled Class D amplifiers with high-quality
linear power supply units

Advanced Transmission Line technology provides high sound pressure level
(SPL) and superior bass extension

Unrivaled tonal accuracy, clarity, and dynamic range with exceptionally
low distortion

Powerful onboard DSP engine provides:

Extremely accurate digital crossover for pristine imaging

Bass Port Emulation mode to emulate tonal characteristics of ported bass
reflex speakers

Precise gain trim, low- and high-frequency adjustment, and speaker placement
settings

Low jitter analog-to-digital converter (ADC) with low-noise clock oscillator

Sound dispersion design maintains accurate frequency response even in off-axis
listening positions

Digidesign RMS	RM1	RM2
Specifications
Frequency Response	50 Hz - 25 kHz	40 Hz - 25 kHz
Peak SPL at 1 meter	111 dB	113 dB
Effective Line Length	4.9 feet (1.5 meters)
Drive Unit: Low Frequency	5.5-inch (140 mm) doped cone with cast alloy chassis	6.7-inch (170 mm) doped cone with cast alloy chassis
Drive Unit: High Frequency	1-inch (27 mm) fabric soft dome with ferrofluid cooling
Crossover Frequency	3 kHz
HF Adjustment	-4 dB to +3 dB in 0.5 dB steps; corner frequency 1 kHz
LF Adjustment	-4 dB to +3 dB in 0.5 dB steps; corner frequency 750 Hz	4 dB to +3 dB in 0.5 dB steps; corner frequency 500 Hz
Input Connectors
Analog	XLR Female—PIN 1 GND, PIN 2 +, PIN 3 -
Digital (AES/EBU)	XLR Female—PIN 1 GND, PIN 2 +, PIN 3 -
Input Impedance	22k Ohm
Sensitivity
Input Level for Full-Scale Output	Adjustable from +4 dBu to +19 dBu
Gain Trim	Nominal gain setting from 0 dB to -15 dB in 1 dB steps
Analog to Digital Specifications
Maximum Input Level	20.9 dBu
Signal to Noise Ratio	111 dB A-weighted
THN + Noise	-95 dB
Conversion Rate	24-bit / 96 kHz
Digital to Analog Specifications
Output Voltage	6.37 VRMS
Signal to Noise Ratio	110 dB A-weighted
THD + Noise	-95 dB
Power Amplifier
Output Power	LF: 80 Watts, HF: 50 Watts	LF: 100 Watts, HF: 50 Watts
THD + Noise	0.05%
Signal to Noise Ratio	125 dB
Frequency Response	DC - 50 kHz
Efficiency	> 92% at full power
Size / Weight / Finish
Height	11.42 inches (290 mm)	H: 15.75 inches (400 mm)
Width	6.1 inches (155 mm)	7.64 inches (194 mm)
Depth	11.81 inches (300 mm)	14.57 inches (370 mm)
Weight	14 lbs (6.4 kg) per unit	20 lbs (9 kg) per unit
Finish	Dark gray texture—RAL 9004

Model: 9900-56413-00
Shipping Weight: 45lbs
5 Units in Stock
Manufactured by: Digidesign